HueyPilotVN
Well-known member
No, it removed the weight off the rear of the DP. The Stacker trailer is now a Stacker Wagon. It took a few trial and error settings to get the weight distributing hitch set up correctly. The Stacker now has four axles instead of three. Maybe too soon to really know but the ride seems much smoother with less bouncing. I still need to get the stabilizer bars connected between the DP and the front of the Trailer Toad. I now notice a slight shift in the tracking of the Stacker after a slow 90 degree turn. Left turns seem to make the rear of the Stacker track more to the right and then the Stacker returns to exactly centered after a right turn. They tell me that the stabilizer bars will prevent this because a very small shift in the alignment of the front drawbar can move the rear of the stacker a few inches. It does seem to straighten out after a while. I am used to having the same view down either side of the Stacker in my side mirrors. Same amount of side showing,
Here is picture of the stabilizer bars
Here is picture of the stabilizer bars