The RV Forum Community

RVing message boards => Motorhomes => Topic started by: slowrider on November 06, 2017, 09:16:57 AM

Title: Winnebago 2015 Vista, inside lights
Post by: slowrider on November 06, 2017, 09:16:57 AM
The inside lights on 2015 Winn Vista have only 2 wall switches that control 2 lights.  All the test of the ceiling lights are turned on at each light with a button on the light.  My question is does anyone have an "easy" way to connect some of these lights to a wall mounted light switch?  How hard is it to run wire from a ceiling light to a new wall switch?
Title: Re: Winnebago 2015 Vista, inside lights
Post by: AStravelers on November 06, 2017, 05:37:18 PM
Very, very hard to run the wire inside the ceiling and walls.
Title: Re: Winnebago 2015 Vista, inside lights
Post by: OLDRACER on November 09, 2017, 06:01:38 PM
In my 2012 Vista same problem. Solved for me by replacing awkward button on fixture with a pull cord operated switch, easy fix, a lot more convenient, especially the one over the dining tale which was a PIA, only one side of the seating could reach the button. Cords, not chains, which are too noisy under motion.

By the way, it was a sloppy install from the factory, screws just barely in some wood, likely would've come own on it's own eventually.