Recent content by 574rvman

Thank you for the good info! time to get to work haha

Thanks Gizmo, should I power wash the unit or will that damage it? thanks

Hello, my unit fiberglass sidewalls are very dull. I need some tips on how to make it shine again before we go camping. Thanks for your input

Hello, I was looking for some feedback from people that have used the EPDM liquid rubber roof. How is it holding up? any issues with it? thanks john k.

the part your referring to is a thermistor. In Dometic refers they plug into the light to get 12v power and in norcolds usually in the back. the way to check if a thermistor is bad is to unplug it and that lets the refer run" wide open". if there is no change in temp then you probably have a bad...

Lippert componets manufactures most electric jacks . there is usually a sticker on them that says lci also it might still be under warranty?

Yep the ohm meter did the trick! thank you for teaching me something new today

hello! I was wondering if anyone could explain the proper way to test a heating element on a rv refer? I changed the board and that did not solve the problem. unit works on gas but not electric and has juice at outlet. thank you.....

city water

hello, here's a weird 1 . whenever any faucet is turned on I get a loud humming noise in the lines and I cant figure it out. anybody have that before?? thanks for any comment

Great info, thank you for taking the time to respond. when I fix it I will post it so that others can use the info :) :) :)

Good morn, I have a Atwood furnace 8525-111 that will fire up for about 20 seconds and then the flame goes out then will fire again and so on? the blower keeps running but it wont stay lit. I'm thinking about replacing the board but before I spend the money I was hoping to get some advise first...

thank-you for your help everyone!!

I have a dial manometer and want to make sure I am correctly using it. I take the middle burner off stove top and hook it up there. open it and it goes to 11 in. wc. I then turn off lp tanks and let it set about 15 min ? sound about right? thanks for double checking me

hello, I got a good one here. i'm working on a atwood 10 gal. water heater that wont heat on electric and the gas only stays on a few seconds. the weird thing is when you turn on a faucet the water heater makes a loud humming noise ?? I never seen this before and any suggestions would be much...