Recent content by bigguyone

Looking for advice on camping membership, are they any good, do they let you stay free or for a small fee ($5 to $10) a night. Was looking at the coast to coast membership. Or is there any others that offer things like this?    Thanks for any help.

I'm looking for pro and cons of Coast to Coast membership, or others. Anyone can tell me if there good or not?

Hi, just wanted to thank all who gave advice.  After replacing the stator, rotor and a few other things, reg, brushes and carb it would charge again but not run right.  Took it back apart, Come to find out the pin in the rotor broke. It put the timing Out and made the engine sluggish. So I put a...

Yes i have to say i have had my share of problems with this generator,  first was told the reg was bad, so replaced it but turned out the stator was bad. Had to leave it  be for a while to get money to get new rotor and stator. had to buy a new carb because it sat for a while. Now charging...

Yes using Cummins /Onan parts  i talk with them and on the coil, and asked if the reading was ok, i never could get a clear answer, he said its about .05 never would say if .08/.09 was out of range.  so at $100 i wanted to get more info on it.  Spent enough as it is  LOL

Yes i was able to see it and seems to work ok, the carb is wide open when i start it so cant get any more out of it.  Its like the timing is off on a car slow to build up and no power.  its not the vales didnt touch them, i even tried a new carb on it. it started this after the new rotor and...

Hi  could someone tell me what a coil ohms out to on a KY 4000 gen.  The book said it about  .05  i get .08 to .09,  i am not sure if .08 is still in range or not.  i m getting spark it runs but has a hard time.  it has new carb, new plug, new pump, new rotor and stator. it just cant keep up...

Yes I have check oil levels, I even drained. It and refill. I think I mite have found out what it mite be. I took the long bolt holding the  flywheel out, I saw the key had bent over just enough to allow the wheel to move just a little bit, so I'm thinking its putting the timing off just enough...

Basically I have done just about all that new lines, throttle is wide open, fresh gas.  So don't know what else it could be,  going to take it out and start looking to see if I can see anything.....

Ok didn't know that but will check I have maybe put 50 or so hours on it myself.  Like I said its like timing is off a little.  This thing is eating my lunch. LOL......

Oh forgot. To say it has 700 hours. On it  it's in a 99 RV

Never touch the eng just gen side, everything was fine till it stop making 110 volts. I replaced everything, rotor, stator, bush holder, regulator. Now it makes 110 volts but struggles doing it.  Its like timing  is off, but I know the pin and key was lined up when it all was put back together...

Hi  no but it seem to run fine be for,  & before the charging went out it didn't have any prob. but now after putting new rotor and stator in its like its laboring to keep up.  That's why I thought the carb messed up & I put a new one on.  Its like it cant get enuf speed when under a load & the...

Hello,  I need help please,    I have a Onan 4.0  KY-FA/26100H  wouldn't stay running, found carb was bad so replaced along with fuel pump.  It ran great, used it often.  Then one day it stopped charging, I did all the checks and was told reg may have went bad so got a new one. That didn't fix...

Yes Flight systems will help, I just talk with them today and after testing what he told me yesterday, the problem  was my regulator (I had replaced it earlier) but like he said it can be both regulator and control board that can go out. And both of mine went bad. After he helped test it he said...