Recent content by bigus_d

I suggest installing yourself...  Camping world did my original install, and I KNOW they didn't get it setup right.  I mean, it was on there, but it wasn't living up to its full potential.

Gary... yes... with the ball at the lower setting I went from zero angle to full angle.  The full angle results were the best at bringing the front of the truck down and those were the results I posted.  When I went up I removed most of the angle (and then added a little back to get the new...

Looking for advise on my Weight Distribution setup. F250 6.7L pulling Coleman 263bh...  http://www.fleet.ford.com/resources/ford/general/pdf/towingguides/Ford_Linc_16RVTTgde_r2_Oct23.pdf http://www.dutchmen.com/coleman/floorplans-and-pictures/floorplan-details?modelId=24600...

Thanks!  I just ordered that thief... hopefully that works :)

Fairly new to RVing...  On my last trip out, thought I'd give the black tank a thorough cleanout since there wasn't a line at the dump station.  Took my hose out to connect to the available water source, and found the fittings didn't match. At the Indiana State Parks (where we've done all of...

It worked!  Turns out I didn?t need all the drop this one offers, but it was totally compatible with my hitch.

So... the hitch system states max tow weight with adapter is 6000 (less than my trailer). I found and ordered this: https://www.etrailer.com/p-EQ90-02-4900.html Hope it works!!!

I upgraded to an F250. I was setup with an eaz-lift elite roundbar weight distribution hitch for my old tow vehicle... but that was for a 2? hitch receiver and the f250?s is 2 1/2. I just picked up a reducer, but it specifically says not to use with weight distribution systems. Any idea if I...

Excellent  thanks! Yes. With the bypass closed there is no bubbling and the lines blew out fine. I was just concerned about that little bit of water that is clearly still in the heater. Sounds like I?ll be good to go.

I?m winterizing my trailer for the first time. I?ve drained the water from the holding tank and run the pump as per the instructions. I?ve drained  the hot water heater as well. Now I have 30lbs of air blowing in. When I started that, the water heater sputtered out some more water. Now nothing...