Recent content by carambo46

Thanks youracman I will keep you up dated but I wont be able to work on it for a few days. I think I may have put the horse before the buggy, I think I will have to put it back together and retest the magneto, the coil is  testing OK From what I think  I have read that is the only way to test...

Got the fly wheel off

Thank you youracman you rock that is what I needed to know , I guess that is what happening is I have a weak spark,and no fire under compression I cant get the fly wheel off, put a puller on it and it wont budge. I only had about 5 volts going to the coil. I don't think my manual is as complete...

I do have the manual but it does  not say what voltage should be going to the coil. I have never had a engine that had spark, fuel, air and would not run? unless  timing or no compression.

Thanks youracman I well let you know if I need manual.

It has spark and is getting fuel will not run at all,either the timing is off or the spark is not hot enough. Can some tell me how many volts should be going to the coil? I read some place I think, the volts for the coil come from the alternator? The timing is fixed so should not be that!

It has fuel and spark!  it ran 2 days ago It was so flooded I had to pull the plug and blow out the gas.

Onan MicroLite 4000 turns over, but will not run I have spark and fuel. turns over well and has fuel and spark but will not fire off. thanks for any help. I am afraid some how the timing must be off as in the flywheel sheared and moved some how?