Recent content by Deano2002

your one of those guys that tries to put fear in someone I see, what a horrible thing to do "kill someone" shame on you

I'm not one who lives under the fear of everything going bad if its not new or within suggested change date.

I would by all means look for a good clean older Country Coach, Spartan K4 Chassis. They are built much better than any of these others. They are just under Prevost chassis motorhomes and Newell and maybe Fortravel

I wouldn't believe much about a tire corporation telling you about tire safety scaring you into another set of tires for thousands of dollars before they are actually needed. I bought my rig with tires cracks big enough to stick a pencil in them, drove it 50 miles home on 55mph roads because I...

not lots of vibration but with steam condensate and hot water there's plenty of expansion and contraction

I work for a piping manufacturing company that sells miles of insulated pex up to 5 1/2", yes 5 1/2" down to 3/4", rarely 1/2" and sell thousands of fittings from expand and pressfit, compression and now more and more Sharkbite style fittings. We rarely if ever here of a leak failure with this...

purchased the Honda today for 700. What a nice smooth generator and much quieter than the Onan even running at double the rpm. It is missing the original plastic cooling reservoir and the exhaust heat shield which are available for purchase. Now I'll try to figure out how to use the existing...

those are the 2 places I looked at, shipping to Cal and back would be a couple hundred dollars I'd expect. Hopefully this will be a good one, I asked about it producing power and he stated he checked the voltage on each leg with a Fluke and showed good, I think I need to see a 1500 watt heater...

we have made a agreement for 700, I'm picking it up Saturday. I've seen them on other sites as low as 500 in working condition. Ebay can list them for whatever they want but, they don't always sell for that, I would never pay that kind of money without an in person look no matter what their...

Do you have the name of the place that rewound yours? Chicago is 1 hour from me, the one I found is in California, shipping cost would be a factor

Hi all, my Onan Emerald 3 6500 generator has been out of commission for 2 years now due to a bad bearing on the gen end. I had pulled it apart and replaced the bearing, cleaned it all up and put it back in and never produced power. Seems that the rotor shorted out from what rewinders are saying...

for some strange reason I took out the plug again and it (anode) came out with it tonight. Ordered some new ones to keep on hand 3 for 19 dollars on Amazon

Yes, I see that tiny rod broken off, our water is not acidic, poor QC the thing is 4 months in use

Anode is sitting in the hole, didn't try to do anything yet but, have to get it out to winterize it. I'm thinking of grinding the threads off of the plug and threading it back onto the anode a try pulling it out that way

any ideas how I can get this out? Does this thread out of the opening?