Recent content by Hmr_tym

That's what I figured.  This was the guy at flo jets way of proving the motor is fine.

I removed the motor from the pump.  Motor ran without issue for 20 mins.  Not sure what that proved,  if anything.  A electric motor without load runs well, doesn't really tell me anything does it?

Now I'm wondering if I should add something like this at 75 ft in order to help it push. http://www.princessauto.com/en/detail/metal-drill-pump/A-p5770250e I could leave it inline and just hook up a cordless drill to it when I dump.  Shutting off 3 times is a hell of a lot better than 30.

So,  in order to investigate the idea of the discharge line being to small I did some experimenting tonight. Since I just dumped the tanks yesterday I decided that I would fill them up with water and take the discharge line off the pump all together.  Dumped both tanks right onto the ground. ...

Just dumped my tanks.  Went inside,  wrote that^^^^^.  Back flushed my black tank.  Took the pump off.  Took the blade end apart to make sure it was clear.  Put it back together and hooked it up to the trailer.  Went to dump.  Same story.  Shutting itself on and off.  Runs for 8-10...

Hello.  Been searching information on here and decided to sign up in order to get some help! I've been living in my trailer for 8 months while building a new home.  We recently had to move the trailer to a new location and I'm relying on a flo jet macerator pump for my sewage disposal. I...