Recent content by impireui

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
  1. I

    leaf springs?

    the tires are the same size the pressure is slightly different within 10 lbs i guess that makes alot of difference
  2. I

    leaf springs?

    ok so on further review I measured from the ground to the axel on both sides its 1 3/4" lower on the low side than on the high side at the axel i mean pretty much all that can be is low tire pressure right?the springs after looking dont look broken on any of them.
  3. I

    leaf springs?

    How would I go about shiming them???The weight is fairly equal on each side...
  4. I

    Norcold Refrigerator/Freezer, not getting cold enough?

    I had a similar problem with mine and believe it or not i turned the freezer down to a lower setting and that opened up the air flow to the fridge which let it cool off. my fridge wasnt getting cold at all but my freezer was freezing solid.
  5. I

    leaf springs?

    Ok so My class C is leaning by leaning i mean unlevel sitting on a level surface is there anything this could be other than the leaf springs if so what might it be?how would i check the leaf springs?
  6. I

    towing questions

    wow alot of information guys thanks alot being as we will be full timing and not working at nomral jobs we wont be commuting or or traveling unless we're going to our next stop. I thought a hemi could pull anything lol stupid commercials.upon weighing our options after reviewing this we are...
  7. I

    towing questions

    Ok so We bought a class C catalina coachmen 24' because we were in a hurry to get an rv. We have since decided we need something bigger and have decided to get a 5th wheel or tow behind.I have to buy a truck to tow this.Im looking at a dodge with a hemi right now but im kinda thinkin it doesnt...
  8. I

    Moving an RV on the beach through the sand

    I would try the ply wood or 2 x 12's
  9. I

    Trying to get the back up monitor out.....Help

    Looking at the picture the ebst i could say  is the front bezzel probably pops off to give you access to screw stuff like this typically has retaining clips that you have to be real careful not to break the clips the best thing i could say would be to try to find the manufacturers specs on the...
  10. I

    Generator not starting

    This is the best description i can give: There are 2 steel cables the one revs up the motor and the other i have no idea what it does but when i rev the motor up via the front cable it kills the generator but if i rev it up and pull on the other cable it stays running while reved up. I know...
  11. I

    Generator not starting

    MES (mysterious electrical ****) it shuts down when the engine revs up
  12. I

    Generator not starting

    Ok I got the original problem fixed itwas just the MES now I have to hold the idle to get it goin once it's goin it's fine what would cause that? Then when the air conditioning compressor kicks on it kills the gen ...  
  13. I

    Greetings from Las vegas

    Welcome to the forum.... Im new here too... One thing ive figured out is ppl here know everything :) There is an incredible wealth of knowledge on this forum........
  14. I

    Planning a trip

    Try the lobster and let me know how it was....lol good luck....
  15. I

    newbies full timing in our 97 Luxor

    Welcome to the forum Im a newbie too and totally knew to rving.Im an electrician by trade so Im pretty comfortable with work also. I wont hold the electrical engineer thing against you since your a NAVY man....j/k.... MY Grandpa was retired navy and I tried to get into the navy but they didnt...
Back
Top Bottom