Recent content by jack65274

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
  1. J

    Stabilizing my Class C

    Thanks a lot Carl.  It helps the confidence a lot to know someone has tried it and it works.
  2. J

    changing awaste valve with cable

    I re-routed the drain lines from the gray and black tanks so that the location of the valves was closer to the outside edge of the RV and within arms reach.  That way I didnt need the cable extensions......I could just reach the handle on the valve easily.  The way mine was plumbed it was...
  3. J

    Stabilizing my Class C

    I have a 1999 Jayco Class C motorhome.  Want to stablize it to eliminate the rock n roll when entering it or walking around inside.  Can I do this with scissor jacks mounted to the frame of  the vehicle?  If so, would I use (4) jacks or would I only use (2) in the back.  Any other better...
  4. J

    changing awaste valve with cable

    I changed mine out about a year ago.  It was easy other than the fact that they were difficult to get to.....Im sure that is the reason the mfgr used the cable type in the first place.  Instead of just replacing them, I reworked the plumbing to be able to install the non-cable type in a more...
  5. J

    Inverter question

    I am putting a 400 watt inverter into my RV so I can run my cpap machine at night.  It is rated at 2.5 amps.  The inverter came with 3' long battery cables.  Is it ok to lengthen those cables to reach the battery compartment?  Do I need to disconnect those cables when recharging?  I have a...
  6. J

    Replacing holding tank valves with handle extensions

    Barb that is exactly what I have.  Thank you very much.  I searched hi and lo for those and never found them.  I like the threaded rod idea except the valves dont open towards the side of the coach-they open sideways.  Now I am wondering if I can replumb the pipes to move the valves into a more...
  7. J

    Replacing holding tank valves with handle extensions

    Cant find the answer to this question here anywhere so I will ask it myself.  I need to replace both valves to my holding tanks in my '99 Jayco C class.  The actual valves are behind a panel several feet in from the outside wall and are operated by some sort of cable operated extensions to the...
  8. J

    Califorinia newcomer with many questions

    Hi Everyione, Very friendly place here it seems.  My name is Jack and I live in Southern California.  I have a 32' Jayco Class C 1999 model that I have had for the better part of a year.  I only recently began to be able to use it and am learning as I go.  I mostly dry camp and had some battery...
Back
Top Bottom