Recent content by Windybill

the generator in my 1996 fleetwood is VERY sensitive to changes in altitude. i have to adjust the mixture screw on the bottom of the float bowl often if we are higher or lower. couple of times it would stall if i tried to use the microwave. quick and easy to try. just turned in or out until the...

three rattlesnakes by my creek so far this year. quite venomous and don't seem to be afraid of us humans

Thats Robert E. Lee Voyles. have met up with a couple of times on the Trace. very interesting man.

was just going to say, if time is not important i would not miss the Natchez Trace. Done at least some of it four times. great ride

id like to know if they were armed.

Here is my input on the how old is too old and how many miles is too many. We have a 1996 Southwind, 35ft, F53 chassis, 460 Ford. On June 2 we left Silver City, NM for a cross country trip to the SW corner of Prince Edward Island, Canada. We left the yard with 132,067 miles on the clock. Stayed...

If I were in the area of Canyon de Chelly I'd have to spend at least half a day. Nice campground, don't have to walk much to see all the sights. Been there 4 times so far.

Doug Thorley headers 2 1/2 in pipe on my 1996 Southwind with the 460 Ford. No leaks and the sound is wonderful!

Been to the Bisti Wilderness a number of times, dry camped in the parking lot. Very special place

1996 Southwind, F53 Ford, 35ft. kwikee steps have worked fine for years, today they wouldn't work. The 25 amp fuse was blown, replaced it and the steps worked fine, in and out a number of times. Tried them again after a couple of hours, wouldn't work, had left the steps out, fuse blown again...

At the Triangle T guest ranch and RV park, Dragoon, AZ is the ranch house set for the 1957 movie "3:10 TO Yuma". Full hookups, very nice place to stay for a night or so. Check their website.

1996 Southwind, 35 feet, F53. Have to change the fuel pump, looking for experiences with aftermarket pumps. Ford part is pricey, 22 years old with 128,000 miles. There is a Canadian company, Spectra, that seems pretty proud of their pumps and I guess that is what Oreilly sells. Anybody used...

Had the same problems with mine, I forget how I got it off but it wasn't difficult. I took a small jewelers file to the cutouts that were sticking, had to do a bit more filing than I thought would have been needed but all the buttons wok fine now.

I have tried a couple of forums, I will give your suggestion a try. BTW, I drove by Benson in the MH yesterday, heading home from Tucson.

I have one that I have some info on but not all I would like. I believe it is an original UMC Remington, 4 digit serial number, all the inspector marks are there based on what I have found. A guess it has about 50 percent of what I think is original finish. I have not been able to find what it...