2005 Winnie Vectra flashing "Engine Maintenance" alert on back up camera

[oldryder]

Started the Vectra (400hp Cummins) after a 2 month idle. Engine was serviced last fall and only has about 50 miles on it this year. Started fine and no errors or problems on the dash but getting an "Engine Maintenance" alert on back up camera screen. Never saw this before and no other indication of a problem.

Suggestions anyone?

thx
mark in MN

 

[emiddleb]

You probably have the TripTek system... keypad with "View" "Screen" "Reset" and up/down arrows and displays on your monitor. When you had your maintenance done they didn't reset the info in the TripTek system. It has nothing to do with actual maintenance, just timers and counters in the system.

Your manual explains, but if you don't have one... Press UP/DOWN arrows together. This gets you into the secondary screens. Press VIEW to get to the Maintenance screen. At this point you can use the UP/DOWN arrows to select an item (oil, filter etc) and RESET to zero out the item giving you the message.

 

[Gary RV_Wizard]

My guess is the same as emiddleb - the coach has Trip Tek, which can display trip and maintenance data on the same display as the back-up camera.

Here's an online copy of the Trip Tek manual. It may be a newer version than yours, but the changes over the years have been minimal.