Recent content by Bjwinspect

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
  1. Bjwinspect

    Anyone currently, or in the next few days in Brunswick?

    Thanks.. I found someone on Facebook staying at a park nearby.. they checked on it for me
  2. Bjwinspect

    Anyone currently, or in the next few days in Brunswick?

    I have a motorhome that I had to leave in Brunswick over the weekend. I think it is a bad fuel pump… a mobile mechanic is suppose to be repairing… but communication has not been the best. I am now in Virginia and will need to go get it when finally repaired. Is anyone in the area that...
  3. Bjwinspect

    Help needed.. 98 adventurer removing dog house

    thanks for the ideas… will see what I can find out this week. The holiday weekend makes it more difficult. i will update
  4. Bjwinspect

    Help needed.. 98 adventurer removing dog house

    Update: I broke down on I 95 in Brunswick at night. Lost engine power…… I was desperate to find a quick answer on how the doghouse engine cover was removed… I knew were the latch hole in the carpet was, but could not determine what I needed to use to turn the latch. A mobile mechanic...
  5. Bjwinspect

    Help needed.. 98 adventurer removing dog house

    Got it…will update later
  6. Bjwinspect

    Help needed.. 98 adventurer removing dog house

    Need quick help.. how do you remove doghouse..is it an Allen screw.. stuck on I 95
  7. Bjwinspect

    Surge Protection Necessity

    I have seen multiple post, not necessarily on this forum, but where people have showed pictures of melted plugs, usually 30 amp, and contributed this to power surges. Obviously I don’t know for sure, but I would be willing to bet that most of these are from loose / worn wire connections where...
  8. Bjwinspect

    Leveling Jack power

    Problem resolved ...  a wire at a solenoid next to the pump had a poor connection.    For the past several years all was fine, but I had been parked water front for the past week with wind, salt water and sand.  This probably contributed to the poor connection.  
  9. Bjwinspect

    Leveling Jack power

    Thanks... it?s not the brake... or ignition switch, it worked 350 miles ago..this morning ... this is our last night..home tomorrow... we are pretty level...it?s getting late.. will probably just wait and trouble shoot when we get home. Thanks .. I will update when I figure it out
  10. Bjwinspect

    Leveling Jack power

    I just pulled in to park for the night.  My leveling jacks have no power.    I am going to lift the dash in a few minutes and check fuses... I could use some help to speed the process this evening...anyone know which fuse for the jacks? edit by staff - changed message icon to topic solved
  11. Bjwinspect

    Every been pulled over by the cops??

    I have often wondered what would be best to do if I did.. kind of awkward with a cop at the drivers window.. and trying to get the registration out of the overhead cabinet.. and maybe drivers license on cabinet next to bed.  One thing the cop would not have to worry about is you deciding to...
  12. Bjwinspect

    Another Generator Problem to Diagnose

    ::)  I hate to admit it.... yesterday when I had one of the two breakers trip .. instead of turning that tripped one on.. I turned the ?on ? one off... so I had no power at either.. and convinced I had a problem  :(    I took the cover plate off, tested for voltage at breakers.. and then...
  13. Bjwinspect

    Another Generator Problem to Diagnose

    I should have said in original post.. It is a Onan 5000 Emerald
  14. Bjwinspect

    Another Generator Problem to Diagnose

    Today while exercising  my generator everything was going fine.... I had two 1200 watt heaters and a vacuum cleaner going when it suddenly stopped producing power.  On the generator there are  2 breakers, one had tripped..  The others breaker supplies power to the rear AC unit which also did...
  15. Bjwinspect

    Replacing toilet / bolt pattern in flange

    The 4 bolt are at 2,4,8,&10 o?lock positions The 2 bolts are at 3&9 There are no slots at 3 & 9 for the new bolts to slide into
Top Bottom