Recent content by cic317

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
  1. C

    Axel Replacement

    Thanks, but 1 step ahead of you, no luck
  2. C

    Axel Replacement

    Have tried local shops, nobody wants to try aligning. So I'm heading to replacement
  3. C

    Axel Replacement

    Yes camber on tube, but tire riding on inside edge to point of wearing tread drastically is a problem. I guess the proper term would be bend spindles. Are there any guideline to what can be swapped? I guess if I start with measurements from hub center point and workout?
  4. C

    Axel Replacement

    Hello, Time to pick the collective brains here Have a 2018 RB21 Funfinder, rear axel is badly bent, both sides, front axel slightly bent on right side- inner tire wear . I believe this was caused by a combination of load, sharp turns to get into parking area. Plan on changing both axels, would...
  5. C

    Tire Alignment- NY

    I've ran thru the listed shops, everyone want to replace instead. Was looking to keep it simple
  6. C

    Tire Alignment- NY

    Just noticed 1 tire on rear axel on my trailer is starting to wear on inside edge. Have been looking for a shop to align the tires in my area. Can't seem to find any. Any chance a member in my area has 1 to recommend? Long Island NY Thanks
  7. C

    Propane generator with EasyStart

    2500 watt on dual fuel might not be enough power to start ac. If you check specs on the dual fuel unit. The rated wattage is usually for gasoline. Propane wattage will be appox 25% less. Check you ratings before you commit the ac work. Might have to pair another or move up to higher single...
  8. C

    Inverter generators

    Have a 3000 watt Champion Inverter, dual fuel. Was 1/2 price of Honda at the time, and Honda was not offering a factory dual fuel at the time. That was the deciding factor when I purchased. Zero issues with Champion so far. Usually I buy quality name brand tool, But having a few friends that...
  9. C

    Strainer cap on water pump

    Well The check valve at city water hook up was the culprit. Thank you Rene. Hopefully that's the last kink in the system for this season
  10. C

    Strainer cap on water pump

    Update- Strainer repair held, Pump reinstalled, powered up ok. Now the pump will cycle constantly, water backing up thru city water hook up. Tried the bypass valve, pump runs constantly. So is there a check valve that was damaged as well? where? In the pump or in the piping between holding tank...
  11. C

    Strainer cap on water pump

    Dutch, referring to something like this? https://www.servapure.com/Pentek-158195-Slim-Line-12-InOut-10-BlueBlack-w-PR_p_1680.html?gclid=EAIaIQobChMIsObA8cy48QIVA-21Ch0Ccwu-EAQYBSABEgKI4PD_BwE Not a lot of room where pump is mounted, would have to do some repiping to make this work
  12. C

    Strainer cap on water pump

    Pump is shurflo 4008 rv revolution bypass pump, after a little more investigating, I realized the strainer is separate. Unfortunately the quickest I can get a strainer local or on line is after we weekend we're using the trailer. So Just picked up some JB weld for plastic. Will report back on...
  13. C

    Strainer cap on water pump

    Hi All, Getting ready for fist trip since 2019. while sanitizing water system, found a leak at the pump strainer, bottom section of removable cap fell off. Guess There must have been a little water left in system. Is this cap replaceable? New pump? I was thinking about a fix with epoxy. What is...
  14. C

    Leaf spring help needed

    WOW! Where was that stored? Either I need new glasses or those axels appear to have rusted thru. Appears everything needs replacement. As to lifting trailer, n heavier springs would raise the rear and lower front. From you picture, the trailer now sits nose high.
  15. C

    Hardboard paneling?

    the material you are replacing is most likely 1/4". 1/8" is usually for door skins. Google lumber yards in you area, you should find it there. Very common material Tempered hardboard is Masonite, not very appealing But would be ok if you were just painting. If so use an oil primer first, latex...
Top Bottom