Recent content by NY_Dutch

The ReadyBrute tow bars can be equipped to work with any of the major base plates. The Elite version even includes a brake system. https://www.readybrake.com/store/c2/Aluminum_Tow_Bars.html

Like the others have said, our's works with the flush pedal depressed on our Thetford Aqua Magic Style Plus porcelain toilet. The toilet is available with or without the water saver sprayer.

Here's an older version of the photo. You decide what's Photo-Shopped or not... ;)

I agree, it sounds like a bad neutral.

We use bed sheet "garters" to tighten our standard queen mattress pads and fitted sheets to our RV queen mattress. https://www.amazon.com/RayTour-Adjustable-Fastener-Mattress-Fasteners/dp/B072XJTV7V/

We saw this one at Salt Springs Recreation Area in the Ocala National Forest in Florida a couple of years ago.

With the engine as close to the axle as it is, it may not be all that bad.

Between the available open grill area and the open area underneath between the bumper and the firewall, overheating may not be as big a problem as it might seem,

For more information about your Tuffy, you could try an inquiry to the RV/Motorhome Hall of Fame in Elkhart, IN. https://www.rvmhhalloffame.org/

Take a look at this one, Rene. The cutout size is 3.6" x 2.67". https://www.amazon.com/RISTOW-Upgraded-Deadbolt-Trailer-Replacement/dp/B099WN7QKM/

The photos have been kicking around online for several years, Rene. Did you notice the Jeep has a tow bar on the front?

When you absolutely can't leave home without it...

Surface rust on a permanently mounted ASME LP tank is usually of no concern as long as there's no deep pitting. Hand sanding to remove the loose rust followed by spraying with one of the rust converter products and a final coating with a light gray rust resistant paint should stop any further...

The same motor that runs the inside circulation fan also runs the external combustion fan on the opposite end of the shaft.

ASME = American Society of Mechanical Engineers "ASME is the globally-recognized, trusted source of standards used around the world." https://www.asme.org/