Hello fellow Escapees,
I have new 21NEF2 that’ll be in our driveway in a few weeks. I’ve researched hard for a good coupler lock + pin lock and can’t find a good one. It’s either, “easily broken or picked “, or “ jammed “ or loose fitting. Doesn’t matter the price point, cheap or high end, US...
To all you Anderson Ultimate users. I’m doing a little pre installation research before the 5.0 is ready!
What keeps this thick smooth part (with the hole in it) from threading in and out of the main body? It easily turns (with the cable) and as it does, it adjusts how far the slider engages...
Now that I have your attention the nipple end of my grease gun hose is stuck on the zerk nipple. It was a new hose and gun. Was really hard to get it off the 1st 3 zerks. Ended up cutting the hose to get the gun off because il moving tomorrow.
Any idea what may have caused this? Or how I can...
Hello to all. I am a brand new member and this is my first post.
My wife and I are to buying a 2024 Surveyor Legend 252RBLE in the coming weeks and I am hoping that some one can answer this question... what is the level coupler height of this trailer?
The center of the receiver on our tow...
We have an older Wildwood (2004) and we always have issues getting the coupler on the hitch. We were thinking of replacing the couple latch but can’t find a latch replacement for a 2 5/16 ball. Do they make these or should we just replace the ball with a 2” ball? We are new to all of this so...
Hi Everyone,
Looking for someone who is willing to measure the height to the bottom of the coupler (levelled) on a 2014 Flagstaff Mac or Rockwood Freedom with 13" tires.
I have a 2016 Flagstaff Mac 206ST (Same as Rockwood Freedom 1910) and it is currently in winter storage. I ended up...
I'm totally new to travel trailers and just picked up a 2018 r-pod 179. The guys had a hard time getting the 2" ball seated in the coupler when loading it for me to tow home. I inspected the coupler when I got home after unhooking and noticed there is very little movement between the coupler in...
Hi guys.
Searched internet to no avail because most of the people are asking the opposite question.
Can I use my 2 5/16 TT ball to tow a standard cargo trailer or flood light setup? Most of these have 2 inch couplers. Will it fit over the slightly larger ball?
I apologize if this seems...
My rig has a "thumb latch" coupler. Illustration.
I don't like or trust it. I looked for some sort of adjustment to snug up the "latch", but I didn't see anything. I get some slop on the ball...starting, the balls slips forward in the coupler, going downhill using engine braking, the ball...
Hello,
I am brand new to the Camping world in USA, just moved over from Germany.
Although I grew up with camping and Caravans - here in US is everything bigger greater and simply really fascinating and - related to RV's and Camping a lot of things simply different.
I am waiting for my new FR...
Hey Everyone - I'm going to pick up my new 2023 e pro 20bhs in a couple weeks, and I'm buying a hitch before I go pickup.
I didn't measure while I was there, but I had the dealer measure - and he's telling me it's 24.5 inches from ground to bottom of coupler.
Everything I've found online is...
Hi all. about to purchase a 2007 2720 and will use my 2008 ridgeline to tow it. the problem i'm coming across is the coupler and receiver are the same height. 17" so there is 0 drop. i can't find a hitch that is zero drop. anyone had this issue? or did you find a hitch that would work?
Hello Jayco Friends,
Our 195RB was stolen so we were out of the game for a year but we are coming back! Next week I will pick up a very gently used 2021 224BH (wanted to stay in the Jayco family).
Can any of you 2021 224BH users please send a pic of your coupler? No euphemism intended. I’m...
We are brand new to RV Trailers. We bought a Geo Pro G19FDS. It has a very annoying coupler latch. Most coupler latches I have used in the past are regular trigger latches. Once you pull up on them they will stay up while you raise or lower the trailer off or on the ball.
The Geo Pro, I have...
Its a challenge slowing down would be thieves. I get that nothing is 100% effective but nice to do an effort to say you tried. I just fitted the Trimax Umax kit. Reasonable I think. Although I do have the axles chained as well. One thing I thought was a bit lacking is the coupler latch lock...
I will be purchasing a 2021 Solaire 147x from out of state. I may need a new shank with drop or rise on the towing vehicle. What is the coupler height of the 2021 Solaire 147x?
I finally decided to break out the soapy water to identify where my air system is losing pressure, and I found two similar connectors that I think are the culprit. It's a slow leak, but I figure I should try to replace the connectors as soon as possible to avoid overworking the compressor. Can...
Hi all,
New owner of my first TT here (2022 Grey Wolf 20RDSE). :)
I've already read many very useful threads on here, and many thanks to all those that contribute to this wealth if information. It definitely helps people!!
I am currently shopping for a WDH for my trailer and one piece of...
We are picking up a 310bhi later and I am trying to figure out the coupler height for wdh setup. Does anyone know the height of this or a similar camper.
The dealer told us 26 1/2 but I'm not sure that is correct or not. It was from the salesman and he didn't sound very confident.
I am not...
I have a 26bh trailer it’s a few hours away and recently got a new truck and wanted to know coupler height to setup the height before leaving home to pick up the trailer. Thanks
I have a 2706WS being shipped to me in Alaska and want to get my weight distribution hitch before it gets here. Can someone with a 2706 measure the height from the ground to the bottom of the coupler with the camper level? I’m leaning towards the Anderson hitch and need this measurement to...
This is a Tale of Two Couplers. Or, maybe, three, depending on your perspective.
I recently purchased a Bulldog Part No. 028287 7,000# Collar-Lok low-profile latch coupler. When it arrived, I was underwhelmed. It was rusty, the locking mechanism was too stiff to operate by hand, and the...