plate

Just got a 2026 Jeep Grand Cherokee and looking for a base plate 👀. Just thought I would check in with everyone. Etrailer shows a few but my local shop is not having any luck finding one? Thanks Randy

Had a Ford F150 Set up to be flat towed left and right turn signals work, brake lights work, tail lights work but I’m wondering if the license plate light and the corner lights on the vehicle should be on

I have a 2024 Reflection 320MKS that we bought new 1.5 years ago. I took it in for end-of-year service and asked for the wheel bearings be repacked. They called me to say all 4 wheel backing plates need to be replaced because they found the brake shoes on all 4 wheels to be pitted and cracked...

I bought a CM17B 2025 edition, made by Keystone, sold by Coleman. It has a digital TV antenna and a place to put the TV but i am not sure exactly what is behind that wall. is it a metal mounting plate or do i really need to find the studs? it feels like there is a backer plate behind it cause...

I am wondering where i could get my hands on the plate under the oven? Thanks

[Moderator Edit] My question is where is the VIN on my Bounder 35k? Seems the VIN MUST be on a self destructing type sticker, etched, or riveted plate. It needs to be on BOTH the inside (house) and the frame. I need to check the stickers on the inside… not sure if they are self destructing...

I currently have a 2006 jeep commander that I tow behind my motorhome. I'm looking at getting a 2012 or newer Ford F150 as a work truck and tow rig. my question is I was looking at accessories for the F150 and found replacement D-Ring mounts for the front. They mount directly to the frame and I...

Lost my door “cover plate” for my popup during trip to Yellowstone. Need to find a replacement. Any help would be appreciated! Basically a metal “door” that fills in space above folded in stairs and top of camper.

So this weekend had a nice trip to the smokies, and no issues, but I noticed that the camper was a little more noisey than usual when turning. Later I find that the grease plate has dislodged itself and is now kinda sideways on the kingpin box. ( I am talking about the plastic plate that is in...

Not sure if anyone other than me, is at all concerned with the new vans with Macerators, As the Septic pump Macerators having a "Plexiglas cover" which is less than about 6" from the ground or roadway. Located on the passenger's side just in-front of the rear tires. Many folks I'm learning have...

Ok, so I bought a used truck. It's a 1992 GMC Sierra 2500. It has a hitch in the bed that I couldn't figure out what it was supposed to be, so I went to the previous owner. He tells me it's a fifth wheel hitch, but it was set up backwards. The pin in in the truck bed and there was a travel...

I recently purchased a Passport 2400BH and it came with a smoked glass plate with rubber feet and three holes near the center which clearly are used to attach it to a plastic stand of some sort (with a metal backing plate). I have read all of the manuals and I don't see anywhere what this plate...

Capture plate is designed for a Lippert pinbox. that is 13 ¼" wide. The part number of the capture plate is 331705. $50 plus shipping

Capture plate is designed for a Lippert pinbox. that is 13 ¼" wide. The part number of the capture plate is 331705. $35 plus shipping

For anyone who has been coveting one of the black and white plates with an astronaut having a BBQ on the moon with an Airstream behind him, there is a china company that has a bunch on them on ebay for only $9.99 each! They are not tagged with "airstream" so they don't come up in an airstream...

You can see the bend in the bottom of the beam behind the jacking plate where someone must have tried to lift the trailer. Fortunately there was no structural damage or cracks.