2012 cougar by keystone

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
Joined
Sep 18, 2021
Posts
6
Location
Salem Oregon
My 12v Dometic awning and 12v slide rack and pinion quit working.Checked automatic fuses batteries and 12v fuses in converter all are good.12v at converter but no 12v at awning and slide switches.
 
Then the problem is likely a disconnected wire for that circuit. However, often the slide is wired direct to the battery with its own inline fuse rather than going through the mian fuse panel. Maybe the awning is Tee'd from that. You might trace the slide power circuit back from the slide controller to the battery. The slide switch is mot the main power circuit - it merely triggers the slide relay. The primary power for the slide goes to the relay, not the switch.
 
Then the problem is likely a disconnected wire for that circuit. However, often the slide is wired direct to the battery with its own inline fuse rather than going through the mian fuse panel. Maybe the awning is Tee'd from that. You might trace the slide power circuit back from the slide controller to the battery. The slide switch is mot the main power circuit - it merely triggers the slide relay. The primary power for the slide goes to the relay, not the switch.
I wonder where the relay is.
 
Back
Top Bottom