99 winnebago adventurer 38

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.

kstaven

New member
Joined
Apr 29, 2019
Posts
4
Hi:

My slide control with is not getting power to it. I can find no bad fuses. I understand there is a relay under the dash but as yet have not been able to find it. This unit has a hydraulic slide.

edit by staff - changed message icon to topic solved
 

kstaven

New member
Joined
Apr 29, 2019
Posts
4
John Hilley said:
The relays are attached to the pump motor. On your motorhome, they are probably behind the front bumper.

My pump motor is in the back. Two solenoids back there and both functioning. There is no power to the front slide switch on any of the 5 pins. If I jumper live power to the pins I can get the slide to work. According to the electrical manual for that machine there is a relay under the dash. I have gone through every fuse in the machine including the 3 on the pump relays and they are all fine. So I'm pulling my hair out trying to find the issue.
 

kstaven

New member
Joined
Apr 29, 2019
Posts
4
John Canfield said:
Check the grounds and if you still are stuck give Winnebago Owner Relations a call, maybe they can help.

Thank you.

I'll have to dig up their number.
 

kstaven

New member
Joined
Apr 29, 2019
Posts
4
Well I found the problem. Found another fuse holder and the contacts where corroded. Thankful it was nothing major. Thanks for all the replies and suggestions.
 

Forum statistics

Threads
123,879
Posts
1,257,549
Members
129,680
Latest member
CrosbyDave
Top Bottom