A/C Clutch Won't Engage

aricjohnson

New Member
Joined
May 5, 2026
Posts
1
Location
Missouri
Have a 2021 Newmar Bay Star 3626 on the F53 chassis with a 7.3. The chassis air stopped working between our weekend trip going to Columbia Missouri and heading back home. I have replaced the low pressure switch. When that didn't work, I jumpered it. That didn't work. checked 10a fuse for clutch and that was good. Replaced high pressure switch and that didn't work. Have checked for 12v at the clutch connector with the low side jumpered and nothing there. I cannot find any relays. Some sources say on this year Ford did not use a relay for the a/c clutch. Anyone have any ideas what I could try next? It's so difficult to get a mechanic in my neck of the woods to look at this, even though it's a Ford.
 
The chassis air stopped working between our weekend trip going to Columbia Missouri and heading back home.
The compressor will not engage if the R134A is low. And you did not mention such at all. Usually the very first problem that prevents a compressor from engaging.

Simple fix, as all you need is a refill. I have had to do such many times while on the road with various vehicles. A five minute, simple easy fix, if you carry R134A with you as I do.

BTW, not many do this, but it is better for the seals if the A/C is used more often--that includes the need to run it during the winter time once in a while. That will help prevent leaks. R134a has much smaller molecules than the old R-12, so leaks can be more common.

-Don- Tonopah, NV
 
You have an ordinary pickup truck dash air conditioner; any automotive A/C repair shop is capable of getting it working properly. They do need parking space to work on your MH A/C though.
As Don said, buy a bottle of R134A and recharge your A/C yourself. I recommend the refrigerant that has a pressure gauge in the hose, then just follow directions on the container. Don is right, an unused automotive air conditioner will leak out the refrigerant since compressor seals are not lubricated, which is only accomplished by use.
For DIY, go here and download the service manual and Refrigerant guide: Resource Hub
 
Last edited:
I recommend the refrigerant that has a pressure gauge in the hose, then just follow directions on the container. Don is right,

If near Flint I have a full mechanics type gauge set with valves .... I've done many re-charges on older cars. .... My jeep however.. I'll pay the $100 deductible on the service plan.
 
He said he jumped the low pressure switch. Compressor clutch should engage with no Freon in system when turned on with that jumper.
I’d touch a hot wire to clutch. If clutch engages you have wiring problem somewhere.
I recently saw a broken wire right at the clutch.
 

New posts

Try RV LIFE Pro Free for 7 Days

  • New Ad-Free experience on this RV LIFE Community.
  • Plan the best RV Safe travel with RV LIFE Trip Wizard.
  • Navigate with our RV Safe GPS mobile app.
  • and much more...
Try RV LIFE Pro Today
Back
Top Bottom