A/C Freeze Control Sensor?

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.

LlanoLonghorn

Member
Joined
May 18, 2021
Posts
11
Location
Llano, Texas
I replaced my old Duo-Therm model 57915.331 A/C with a Dometic Brisk II 15,000 BTU. The problem is I don’t know if this old sensor should be replaced or where it should go. The old A/C had a hole that it pushed into and snapped around a coil tube. But the new unit does not have a hole to install it.

Picture 1 is the old unit and shows the hole where the sensor went. Picture 2 is the sensor from the old unit.

Also does anyone know if a Freeze control is already built into the Dometic? Or do I need to add one?

Thanks
 

Attachments

  • Photo 1.jpg
    Photo 1.jpg
    72.5 KB · Views: 1
  • Photo 2.jpg
    Photo 2.jpg
    34.6 KB · Views: 1
Top Bottom