Advent roof ac

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.

Fireabear

New member
Joined
Oct 7, 2021
Posts
4
Location
Theriot, Louisiana
Morning
I'm looking for the Styrofoam part off an 1500 btu advent roof air conditioner that directs the air flow that cover the fan motor and bolts to the condenser coil
 

Attachments

  • Screenshot_20210928-114252_Bing.jpg
    Screenshot_20210928-114252_Bing.jpg
    82.3 KB · Views: 13
Welcome aboard. Don't have any solutions from you but wanted to respond and give this a bump.

Hard to tell from you photo what piece you are looking for.
 
Welcome aboard. Don't have any solutions from you but wanted to respond and give this a bump.

Hard to tell from you photo what piece you are looking for.
The peice on the back where the fake blades are. It bolts to the condenser coil. Yea working with phone I'm old with fat fingers that don't send a lot of pictures, still figuring this out. Thanks for input
 
Ok this is a two part post.. Part one I had a Coleman A/C on mine don't recall that part. but then I may well have never looked.

Two.. I get meds in insulated cooles, they are doing it differently now but used to ship in Styrofoam.

Ohama steak still ships in Styrofoam I can measure the one I have but think it's a tad small.
You can cut (And splice) to fit however.
Same with the ones you by at the supermarket.

Only thing to remember is that Coleman is unique in the A/C dept in that they suck.
So once it's past the fan. it can exit the housing

Most others blow.. Makes the others a *Itch to clean the condensers.
 
Back
Top Bottom