ElginRinger
Member
I acquired a new generator a couple weeks ago and had a chance to put it to work this past weekend. Before I pulled the TT to my destination I decided to crank up the generator and make sure what needed to run, would run. In my driveway at home, I connected the generator to the TT, turned on the gen and then turned on the AC. Everything worked fine. The A/C was on max, I had a few lights on and it kept running without fail.
Well, once I got the TT to my destination this weekend the AC would run awhile and then trip the circuit breaker on the gen. I went through normal shutdow as in turning the ac back off flipping the circuit breaker back to on. Again, it would run a bit more and then trip again. Any thoughts on what I may be doing wrong or something I overlooked ??
My setup is a 1977 Yellowstone TT with roof top air and my generator is a Troy Built with 4000 continous, and 5500 surge.
Thanks for all your time.
Well, once I got the TT to my destination this weekend the AC would run awhile and then trip the circuit breaker on the gen. I went through normal shutdow as in turning the ac back off flipping the circuit breaker back to on. Again, it would run a bit more and then trip again. Any thoughts on what I may be doing wrong or something I overlooked ??
My setup is a 1977 Yellowstone TT with roof top air and my generator is a Troy Built with 4000 continous, and 5500 surge.
Thanks for all your time.