backup camera fuze location

[charles nicholson]

                                                  I have a 2007 Winnebago outlook. I      accidentally damaged the cable going to the backup camera. It has been repaired, but I have no power going to the monitor. I can "hot wire" from a 12 volt source and the monitor works. I cannot find a blown fuse in any of the panels. Winnebago customer service has been unable to help. Any help?

 

[John Canfield]

Hi Charles - glad to have you join!

What exact model/floorplan is your Outlook?

 

[charles nicholson]

this is a 31c. does that help?

 

[charles nicholson]

actualy it's a wf331c

 

[John Canfield]

It appears the monitor is on the same circuit (page five here) as your electric mirrors - do they work?

 

[charles nicholson]

Just checked and mirrors do not work. According to my owners manual, that is fuse # 17, and it is ok.

 

[Alfa38User]

and...  it appears to be the wrong one, the docs are incorrect, or interpretation of the fuse block or its designations???.

A voltmeter to check the voltage on both sides of a fuse or use an ohmmeter on the fuse itself after removing it. Looking is not a good method to check fuses as the smallest crack in the fuse material disables them.

 

[charles nicholson]

Checked the fuse with an ohm meter and it's a good fuse. Replaced it anyway, but still no joy.

 

[John Canfield]

Charles - looks like you have a Ford chassis 12V issue then as far as I can tell from the wiring diagram.  The 12V source side of that fuse goes to "Ford Wiring."  I'm out of ideas.

 

[charles nicholson]

Thanks for trying. I'll see if the local Ford people can help.

Charles