A quick question regarding the Break Away System when disconnecting from the dingy. When removing the coiled cable from the dingy, do you leave the ring and insert in the junction box or do you leave both in place and just unclip the cable? Is there an advantage to either way? Disadvantage? I have my own thoughts and just would like to hear from others.
Brake Buddy Break Away System
- Thread starter Murphcrud
- Start date
The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
grashley
Well-known member
If you "pull the pin", you essentially activate the emergency break away system. Do not do that! Just unclip the cable.
HappyWanderer
Well-known member
- Joined
- Apr 21, 2014
- Posts
- 2,967
grashley said:
Not on a Brake Buddy. Pulling the pin simply shorts the leads on the breakaway cable. If you've already disconnected the Brake Buddy inside the toad, which requires unplugging the breakaway cable, pulling the pin does nothing.
nvrver
Well-known member
ChasA X 2 - I leave it in so dirt won't get in. Dick nvrver
