Dometic re-igniter question

[jfbrubaker1969]

So I have diagnosed that the re-igniter module in my Dometic 5201 refrigerator has failed. Probably close to 10 years ago the igniter indicator lamp went bad. Since I am now having to replace the igniter, I'd like to fix the indicator lamp as well. Unfortunately it seems that nobody has that indicator lamp anymore, so I will have to see if I can make something else work. Does anyone have any idea what the output voltage is from the re-igniter to the indicator lamp is?

 

[gwinger]

Use voltmeter on the lamp wires.

 

[Kirk]

LED?

 

[John From Detroit]

If it's an led 0.2 volt but that is provided via a resistor so just the replacement LED will work and most any LED will work.

If it is a filament type lamp 12 volts most likely

 

[jfbrubaker1969]

Use voltmeter on the lamp wires.

Yeah, well, like I said in my post...the igniter is dead, so 12v in...nothing coming out.

 

[jfbrubaker1969]

LED?

filament with an 82k resistor soldered to it.