Electric

[tonyvinn]

Sorry, I couldn’t figure out how to edit my so here’s some additional information to my current issues of no power to the store. The main 12 V power switch at the steps is in the own position and other items on the 12 V system are working nothing at the dashboard Gauges included
I did run 12 V power directly to the switch when the switches in the on position or start all of the functions received 12 V the motor will not start and there are still no gauges Functioning

 

[Kirk]

This year I have no power to either the front panel or the rear panel
There is no power to the ignition switch
But all of the fuses are good
Can anyone tell me where the ignition switch gets its power from?

Am I correct that you have checked the starting batteries? Most diesels have two batteries for the engine and different batteries for the RV part. I think that you are asking about a Monaco Dynasty diesel pusher? The coach section is from batteries and if you have 120V power from outside connections, there is also a converter that converts 120V alternating current into 12V direct current power so that might be the source you have, but it would not supply the instruments on the dash or the ignition.

 

[Rene T]

If you want to make changes to your post, click the down arrow below your text then click on EditMake the changes then scroll down and then click on Save