epoxy

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
How much weight?  Epoxy is nothing more than glorified glue, so if your adding a lot of weight over a small area it too will likely pull off.  Industrial strength double sided tape will do just as good.
 
Two part epoxy comes in different formulas, JB weld is good but there are better, but not in a small tube form. More info on the project would help. I use two part epoxy on boat builds, you will destroy the parts before it comes apart at the joint,,,gregg
 
I've successfully used the JB Weld Industrial (bigger package) to  re-attach fiberglass body panels to metal struts on my coach.  Held up fine for at least a couple years (still ok when I sold it).  I've also used Sikaflex glass-to-metal adhesives for similar problems.
 
Corky said:
Firm believer in West System epoxies.
https://www.westsystem.com/

X's Two on West Systems
.It is the best there is. I do a lot of epoxy work and won't use anything else.
Also their G-flex epoxy will adhere to anything including plastic.
Give them a call and they will walk you through your project.

Jack L
 
Back
Top Bottom