id of thin-lite

[onevw]

how do i id the the light
I need a ballast

 

[EdJunior]

Probably need a bit more info.  Well, definitely need a bit more info. 

 

[grashley]

Often, it is as easy to replace a fixture as it is to fix one.  RVUpgrades is a sponsor here, and offers a wide choice of lights at very good prices.  I have purchased from them several times.

 

[onevw]

Probably need a bit more info.  Well, definitely need a bit more info.

yes I cannot post a pic of it I cannot get ant pic less than 350 kb to post

 

[onevw]

Probably need a bit more info.  Well, definitely need a bit more info.

 

[Gary RV_Wizard]

Pop the translucent cover off and the model info and ballast part number ought to be visible inside.  This guide should help:
http://www.solarseller.com/thinlite_ballasts_replacement_dc_ballasts_thin_lite_.htm

Or bypass the ballast and install 12v led instead, either a led tube that snaps in with minor wire change, or remove the tubes and balalst and glue in led strips.

 

[darsben]

Pop the translucent cover off and the model info and ballast part number ought to be visible inside.  This guide should help:
http://www.solarseller.com/thinlite_ballasts_replacement_dc_ballasts_thin_lite_.htm

Or bypass the ballast and install 12v led instead, either a led tube that snaps in with minor wire change, or remove the tubes and balalst and glue in led strips.

Thats the answer. Less expensive and less heat build up