Mopar1973Man
Senior Member
- Joined
- Dec 13, 2010
- Posts
- 3,898
Last fall some of you remember I left the power on to the water heater after winterizing. Never the less I went out to fire up the RV because we are planing on sneaking out and using as a hotel room while out appliance shopping for the sticks and bricks. I purged all the lines and load the system with water. Then grabbed the DVM meter.
Element Ohm's out at 10 Ω and has a good 120 VAC at the terminal when the power is on. So now the test to see if the heater actually heats on 120 VAC after being ran dry. :
Element Ohm's out at 10 Ω and has a good 120 VAC at the terminal when the power is on. So now the test to see if the heater actually heats on 120 VAC after being ran dry. :