R-Vision Help needed

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.

antonbyas

New member
Joined
Jan 21, 2025
Posts
1
Location
CA, United States
Hello,
We recently bought a 2004 TC23QB which had been torn apart by the previous owner to replace some bad floor. They told us that all the pieces were there but after replacing the WHOLE floor we have come to realize that there are some pieces missing. Only the top of the bed with the hinge for the under bed storage is there, so we will have to build the base of the bed that this sits on. Is there anyone out there with this floor plan that would be kind enough to measure the box that the queen mattress sits on?
 
Welcome to The RV Forum!

Usually the bed support is a box that is about 4"-6'' smaller on all of the exposed sides than the top piece which is the same size as the mattress. The exact dimensions aren't critical, the idea is to give you some toe kick room as you walk around the bed.
 
Back
Top Bottom