Removing Zep from my graphics

[moritzml]

I am trying to remove the Zep from my graphics.  It has turned milky over the dark graphics and I could not get it off with wax remover.  Any suggestions. Has anyone had problems with Zep causing decals to crack?

 

[sightseers]

Zep also sells a remover.

 

[PancakeBill]

Their remover works really well.of course, to will drip down and remove whatever is below as well.

 

[Utclmjmpr]

A citrus cleaner works also .>>>D

 

[ClickHill]

Maquires oxidation remover will remove the milky white residue.  Then use Maquire Pure carnuba wax and finish off with Maquires Polish. You can buy all three in a kit on Amazon or individually from most auto parts stores and marina stores.

 

[blw2]

A solvent, such as acetone, will remove it...but I have no idea if it would be recommended over the graphics and other finishes.  I know this because I used acetone ( & also another, laquer thinner I believe) while I was doing some repair and resealing work and it stripped the acrylic floor polish off mine lickety split....not what I was trying to do mind you....  I've noticed no ill effects on my finish, but your may be different... or maybe I just haven't noticed something that happened.