Replacing water tube that fills tank

[TheBubbleFilms.com]

This tube is ripped. Easy enough to take the clamp off of one end of the hose by the tank but how do I get to the end by the outside wall. Should I take the panel off and come at it from the outside or am I supposed to get to it from the tank access panel?

 

[Rene T]

If you can’t get to it from the inside, the only alternative you have is to remove the outside door frame and just pull out the assembly. Reinstall and use a butyl caulking to go between the flange and the frame.

 

[TheBubbleFilms.com]

Got it. Thank you for your help.

 

[Kirk]

Most are bedded in butyl tape when you replace the cover. This will show you what the back of the panel looks like.

 

[John From Detroit]

The hose appears to be 1 1/4" pool vacuum hose by the way at least on my rig.

 

[Rene T]

Do not buy hose yet until you verify what size you need. I think one trailer I had it was a little smaller than 1 1/4”.

 

[CharlesinGA]

Its either THIS 1¼ ID hose or THIS 1-3/8 ID hose.