Scan Gauge on Winnebago

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.

jimlaurielucy

Well-known member
Joined
Mar 16, 2009
Posts
46
I had a Scan Gauge on our prior RV a Winnebago Spirit E450.  Now on our new Adventurer with the F Series chassis ,I have located what I thought was the port but it does not fit.  I contacted San Gauge and they are not familiar with where the ports are located on RVs.  They both have the Ford V10 so any advise would be appreciated.
 
It should be located on the right side of the steering column at about the half way point.  You may have to remove the dash trim panel in order to see it and plug in.
 
Thanks for the reply,  The plug I saw was half way up the column and clearly visible,had a cap over the connector,i assume a dust cover.
 
jimlaurielucy said:
Thanks for the reply,  The plug I saw was half way up the column and clearly visible,had a cap over the connector,i assume a dust cover.

That is the OBD II connector and they do come with a cap on them.
 

Latest posts

Forum statistics

Threads
134,577
Posts
1,431,856
Members
140,154
Latest member
AsenathBarzani
Back
Top Bottom