Back2PA
Well-known member
- Joined
- Jul 26, 2015
- Posts
- 5,766
For those with leveling systems on their trailers, do you still put the low side tires on blocks to get it close, then level, or just use the leveling system?
Rene T said:IMHO, I would still partially level the rig with blocking first then use the self leveling jacks. I think doing it this way, it may give the trailer a little support by some of the weight on all the wheels. Maybe not.
Gizmo100 said:Funny you should bring this up....
While we were out west I drove past a smaller Class A with 3 of the 4 wheels in the Air. Why they picked that spot is beyond me.
The drivers side front was just slightly off the ground but both the back tires were 3 plus inches. It scared me just to look at it.
Gizmo100 said:Funny you should bring this up....
While we were out west I drove past a smaller Class A with 3 of the 4 wheels in the Air. Why they picked that spot is beyond me.
The drivers side front was just slightly off the ground but both the back tires were 3 plus inches. It scared me just to look at it.
Rene T said:I think I'd be worried about cracking a windshield with all the twisting going on if you're not careful.