Tip on installing Support SPP6 hardstart capacitor

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.

Sean in AZ

New member
Joined
Jul 8, 2018
Posts
2
Hi guys,

After watching every youtube video and reading every snipet of info I could find about installing the Supco SPP6 hardstart capacitor, I finally found some time to do the install.

Disconnected the power, removed the cover, took off the metal panel, removed the capacitor for its plastic, installed the wire with extra long clip onto an open pin on the red wire terminal, then looked for an open pin on the yellow side, but there are only 3 pins and each is being used. 

What to do now?

Any help is greatly appreciated.
 
Lou, you are amazing! I didn't realize such an item existed.

My local West Marine store has the double male-female adapter in stock so I will be headed there this morning to pick it up.

Thank you very much for responding.

 
Back
Top Bottom