Sean in AZ
New member
- Joined
- Jul 8, 2018
- Posts
- 2
Hi guys,
After watching every youtube video and reading every snipet of info I could find about installing the Supco SPP6 hardstart capacitor, I finally found some time to do the install.
Disconnected the power, removed the cover, took off the metal panel, removed the capacitor for its plastic, installed the wire with extra long clip onto an open pin on the red wire terminal, then looked for an open pin on the yellow side, but there are only 3 pins and each is being used.
What to do now?
Any help is greatly appreciated.
After watching every youtube video and reading every snipet of info I could find about installing the Supco SPP6 hardstart capacitor, I finally found some time to do the install.
Disconnected the power, removed the cover, took off the metal panel, removed the capacitor for its plastic, installed the wire with extra long clip onto an open pin on the red wire terminal, then looked for an open pin on the yellow side, but there are only 3 pins and each is being used.
What to do now?
Any help is greatly appreciated.