water pump controler

[scrc58]

Hi all.
Having fun learning things.
What I need to know now is does anybody know where
the water pump controller is for a
2014 tiffin allegro red.
Nope its not in the the wet bay with the pump wires go up under 1/2 bath.
Looked in all compartments, doors and drawers just can not find it.
Thanks Steve

 

[Gary RV_Wizard]

Follow the Negative (ground side) wire from the pump and you will find it. It usually isn't far.  Assuming there is one - systems with one or two switches [only] may be hardwired via switches rather than using a controller.

 

[Henry J Fate]

This link may help too.


https://www.google.com/url?sa=t&source=web&rct=j&url=http://www.tiffinrvnetwork.com/crusingator/P/P-085.pdf&ved=2ahUKEwiFi_SevYPuAhVOu1kKHVLzBSYQFjAAegQIARAB&usg=AOvVaw29HtHBYaX1Pz2gTvL_hsPP

 

[scrc58]

Thanks so far
Have removed the panel on the top of wet bay and followed the wires from the switch to the point
they go up into the floor above the frame.
Back story
With the switches off you can turn it on and all is good
turn switch off and wait a while and it will turn itself back on.
Would be fine if mh was being used all the time but now that it is winterized it just lets the pump run.
If I can find the controller I could diagnose the problem better

 

[PancakeBill]

In the meantime, disconnect the ground. 

 

[scrc58]

Yep first thing I did.
I'll get back in there tomorrow and see if I can find it.
More to come

 

[scrc58]

Just an update
Henry fate's link was a good one it was very close.

found the controller behind the wet bay wire tied to a water line right behind the steel panel.
To small of a space to get your head into just your hand and feel around.
I cut the wire ties and moved the controller out to the top of the wet bay in front of the top panel.
Opened up the controller and found it had corrosion from being wet.
Hope this might help someone else.
Thanks to PancakeBill, Henry and Gary
Steve