powered fan/vent

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
C

candyk

New member
Joined
Jun 1, 2015
Posts
2
installing a powered vent/fan with wall switch.  Fan works great.  Powered lid opens but will not close.  Any ideas about what's wrong? Thanks for the help.  candyk
 
Welcome to The RV Forum Candyk!

What kind of fan did you install?  Sometimes you have to bring an unswitched source of 12 volts to the fan for the raise/lower motor to work properly.

When you turn the wall switch on, 12 volts is available to raise the cover.  But when you turn the switch off, there's no power to retract the cover.
 
it's a ventline fan/vent with a rocker type wall switch. the switch is pre-wired so just have to match up the hot, common wires.  going to test the switch to see if it's the problem.  Thanks for the input!!
 
You must log in or register to reply here.

Latest posts

Members online

Total: 887 (members: 25, guests: 862)

Forum statistics

Threads
132,113
Posts
1,390,560
Members
137,832
Latest member
merlee&drebug
Back
Top Bottom