Recent content by Bigtollehouse

Thank you.  I'll post when I get it done.

We have a 2005 Minnie 26H and are going to replace the original CRT with a 24" Sanyo from Walmart.  My plan is to mount a 12X21" piece of oak over the opening after we take everything out.  Then mount the articulating arm to the new piece of oak.  We will still have room to put a blue ray player...

Thanks for the info.  I will follow up

Happy New Years guys, I tried inflating the bags on the rig.  PSI range 20-100.  I inflated one to 50 psi  The other one does not inflate and I can't get any air out of the valve stem.  Any thoughts?  Do valve stems have to be replaced?  Do the bags leak? Any help would be appreciated.

Happy Veterans day to all us Veterans!! I just got a replacement lock from Mobility RV and all the pieces are in the bag.  I'm not good with puzzles.  Anybody got a link to the schematics for the 26A ?  Some one got me a link for the plumbing awhile back.  Thought I would try my luck again...

Okay guys, here is my big Duh! moment.  It seems that the water intake from the opening to the tank is so shallow, (little pitch), that I needed to level the rig for the water to go in.  Got the tank flushed and refilled.  Thanks for the help.

Thanks guys.  I'll try the slow approach first.  If that does not work I'll have my son look at the schematics with me.    Quick response is much appreciated.

I just bought this rig.  I used the outside shower to drain the fresh water tank.  (I did not get under the bed because of lifting limits).  When I stuck the hose into the fresh water gravity fill it would take water briefly then shoot the water back out.  Is there more than one way to fill the...