You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
Recent content by DaveRB55
The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
Just thought I would follow up with the close. Motor and brake were replaced this morning. Ran the slide in and out 4-5 times and works great. Thanks again all for your input.
Dave
Hi John,
The electric brake is mounted on the top of the motor. As soon as he disconnected the brake assembly from the motor spindle, the motor started running. Replacing the motor in the morning so I guess I will find out for sure then.
Dave
Well thanks for all the comments.
Turns out the problem wasn't the motor but the brake mechanism. Unfortunately, LCI doesn't sell the brake separately, they would rather sell a $900 motor assy. No surprise there. I was about to start doing some probing but the mechanics showed up. Really...
John,
Thanks for responding. I tried probing the connector to the motor and I tried it on the motor that works first so I would know what to expect. However it did not show voltage and immediately displayed by LED code that I had a bad motor connection. I guess the sensor knows there is a...
Hello,
For those of you that replaced your Ideal bed with foam..I am wondering if you have the tilt-a-bed design? We have had problems with our Ideal bed and had to replace pump and bladder on one side. We thought about going to foam but was told no guarantees that the foam would hold up to...
Hello Everyone
Happy Sunday to you all. My motorhome is now at 100% for slide failure. After replacing motors on both the passenger (right) and bedroom (left), I now have failure on my drivers (left) room slide.
Motorhome: 2016 Suncruiser 38Q
Equipment: RPE DigiSync room Slide system by...
Hello Everyone,
My apologies for not getting back on this issue, we had some travel away from the motorhome for most of Feb. I did purchase the scope to find the leak. its a very useful tool although somewhat difficult to view as things are magnified quite a bit. I did determine the leak...
Buy an Endoscope...great idea, thank you. Ordered one this morning! This thing is driving me nuts. As I was removing my air compressor connection and re-attaching water, my wife started a load of wash and I saw faster water dripping than I have. Puddle was about 2 ft wide. This morning...
Thank you to everyone for your assistance. Gizmo, I agree with your pointers on probable leaks. When I removed the screws with the shower faucet faceplate, the housing was just hanging. I had to hold on to the faucet stem as I was nervous I would push it in. I don't think it would fall as it...
Wow, it pretty much is just handing there. Not sure how anyone would ever replace it without tearing up the shower hole but I should be able to get it back together. The little spittle of air I heard stopped...nothing I did to stop it. Also poked a flashlight in and everything looked dry in...
Back Again,
I disconnected water lines, blew out water and closed off each faucet. No sound from below that I could find. I have a single control shower handle and I could hear a slight spitting noise behind it that stopped when I removed air. I began to remove the two screws from the face...