Recent content by LspTpr

Thanks for the answers. I wasn't looking to run it off inverter vice using gas, I was just curious why mine was using a plug without inverter capability and if damage would occur to it if using inverter in an emergency situation since I have learned in past that it's what I don't know that...

Agree with both of you and understand. I just curious if there was a reason for it being that way such as if it would damage the refer to run it on the inverter

The other day I lost power to my motorhome while I was gone for the weekend. The fridge was set on ac instead of auto so everything went bad.  I wondered why it didn't stay on with the inverter(I have a freedom 20 and four batteries) like some other items did.  Checked the plug and it is only...

Hey guys thanks for the input.  I found the manual for the remote control panel.  Last step of troubleshooting said if lights blinking other than what stated unplug the phone cable on back for 30 secs.  Did that and working as normal now.

Thanks guys.  I already have both the manuals and the troubleshooting sections dont show anything for what i described.  Not sure how to totally power it down but will research that tonight when i get home and give it a try.  again thanks.

I read on here a lot but never posted because the 2002 Ultimate Advantage I bought 4 years ago has never given me a big problem that I couldn't find a solution for, only minor that this site has helped great on.  Now I  have one that I cant find any info so hoping you all can put me in a...

I did that over the summer on a trip from new orleans to charlotte, NC.  I had 7 people in the motorhome and 2 cars following with 4 each.  We called ahead at a La Quinta both times to see if any problem with putting a 40 ft MOHO in the parking lot if rented 3 rooms.  Both places had no problem...

Just wanted to say thanks to all of you.  My door lock quit working about 2 months ago using the fob.  The lights would flash but no door lock movement and the compartments were working fine.  I was to busy (lazy) to deal with it lately so didnt.  I read this post, walked out and cleaned the...

I appreciate ya'lls input and have been searching this forum all day and found/read all the items that you all are talking about.  I really am thinking of the soldering thing because i have a soldering iron but am scared due to not having a clue what i would be doing.  I did not see anywhere...

Thanks Ed.  I have a 2002 Ultimate advantage.  I thought the radio might do it to but it doesnt.  I also tried the 3 setups on the tv involving the sound output but that was to no avail.  Definately dont have the knowledge to soldering things.

I just replaced my old Sony with a Dynex model: DX-32L220A12.  Thought I was doing the right thing cause it has the audio out jacks.  After installation, I get sound from the theater system but I cannot adjust it.  The volume on the TV will go up and down but the theater sound stays at the same...

Started out camping with my son in a tent on cub scout/boy scout events.  Then living in the New Orleans area and being a Trooper, my family evacuated for hurricane Katrina for Arkansas.  When I finally got in touch with them two weeks later they were in MS and bouncing around hotel to hotel. ...

Have been hunting for weeks for a replacement muffler for my 2002 ultimate advantage.  can only find one with same dimensions and it was $300 with i believe is to much for a muffler.  have talked to winne, spartan, Cummings and local dealers with no luck .  Any ideas where i can get one, mine is...

thanks for the info.  I was going to look at having the seats redone but what i dont like the most is the width.  The seats are to wide for my body frame and i have to stick my elbows way out to use the armrests.  Going to be finding myself some seats that aren't as wide.

Bradd and Hall was recommended to me by a friend and am reviewing their site.  My fear is i liked all the seats better than what I have, both Flexstel and Villa.  I could find the brand name on seats but couldn't find a model and the salesman had no idea on models either.  I am fearful of...