Recent content by ROBIN52

Good afternoon Pedro Dog, as you can see in the pic, I have inverter neg. Going to the P- side of the shunt and the B- side going direct to the outlet side of the disconnect which is the chassis ground. Thanks

Thank you Pedro Dog, this one made sense to me and worked. The battery monitor works with inverter off, shore power unplugged and generator off. When inventor on it works. When shore power on, inverter off, it works. The same with the generator. The only time it doesn't work is on shore power or...

It’s not my intent to second guess what you and mark are saying, it’s that I don’t understand and I keep trying to do it the way it comes across to me. I can understand your frustration with me and it’s not intentional. It’s a simple thing to you but it’s just not for me. I want to thank you and...

That cable is the chassis grd. So your saying just move that one cable to the other side of the shunt? that would put the chassis grd. with the neg. cable going to the inverter. When the neg. cable going to the inverter is on the shunt it seems to only work when I turn on the inverter. Thanks

This was my last two attempts.

Let me ask a question, should the monitor be working while on shore power? If yes then I still have a problem. I have had it working correctly when off shore power and on inverter. And I can live with that. Thanks

Thanks, will go and try now.

Thanks, will go try that now.

Thanks for the reply, this 70 year old still having a hard time wrapping my brain around this. let me see if I got this. You want me to move the inverter - wire over to the outgoing side at the green disconnect which goes to the chassis grd. The inverter wire is not long enough to reach over...

Thanks, here is the original layout without the shunt attach. The battery on the left has my 2/0 cables going to the inverter. Can you tell me which cable I would use for the shunt B- and which cable I would use for the P- on the shunt? Thanks

Thanks for the reply. The top battery has a - cable that has a loop and goes to the shunt as well. The bottom battery, green disconnect - cable goes to the chassis. I thought I had read the chassis grd. to not go through the shunt. The two batteries have 2 - cables going to the shunt B-. So your...

Good afternoon, have been reading and you tubing for a week and thought I had in my mind how to do. I installed a Renogy 2000 watt inverter and a second TS30 transfer switch and wired the converter to a fuse I installed in the transfer switch. All seems to work as it should. The problem came...

Good morning, Have a 2017 Forest River Sunseeker class C. Have mounted the inverter and wired to the house batteries beside the entry door and want to run the ac wire to the bedroom and hook up to the ATS. My control panel is under the bed. Any ideas on how to run the wire back there? Thanks.

Could you send a pic of your arrangement? Thank you

Thanks for all the advice, I put before the transfer switch and have a hardware monitor that can be seen easily.