Recent content by rving

I found the "scan gauge II" computer http://www.scangauge.com/ very useful. Only a few hundred dollars, plug n play for the most part. Use the scan tool to give you a reading of all error codes which you can then look up for self diagnoses. You can also reset error codes & turn off check engine...

Thanks everyone!!

I have a 600 watt inverter tied direct to the battery's. It has a no load draw of 500ma. It has a shut off switch but I was told that only cuts power to its output not the input. Can anyone confirm our inverters are continually drawing regardless if turned off and if so should we install a cut...

Both Dish and Direct offer a 12v receiver I recommend that if possible. My dish receiver is not 12v so I have to use an inverter. It draws 55 watts. If Im not mistaken the direct receiver is not hd.

I saw these guys mentioned in another thread. http://www.dirtyblindman.com/DBM_Products.htm

I recently had Dish installed in my home. The installer was certified by Dish and under contract. I had the RV in the driveway at the time of the installation. When done I asked if he saw the Dome on top of the RV which he replied "yes" I then asked if I could move one of the receivers to my RV...

I have read a lot a lot of negatives about this class B but I picked up an 05 ( last year made ) with only 15k miles and love it. Plenty of pep, great gas millage and love the floor plan. I bought the QD. It rides very solid. No swaying or rocking very stable. I had a Reyo with I recently sold...

Your probably correct Gary. We re fueled every few states ( by luck the cheaper ones ) and GA was the last fill up along the way. We did not have a need to purchase diesel in FL I parked the RV and sold it. Ended up buying a class B gasser.

Driving from NY to FL this past winter I found Diesel fuel much cheaper in the southern states.

Good info, thank you Gary!

A little more information from my end might help:) Not selling because I do not like the coach, its wonderful. I have some health issues and it was used to get me from point A to point B. I will be staying at one location instead of going back and forth. With the expense of storage ( RVs are not...

Hello everyone What would be the best way to move a 2010 minimizing the hit. A few options I am aware of, on consignment through a dealer, private listing..if so (where) or classifieds on this forum. This would be for the Reyo Itasca. Thank you!

Is Winnebago done with this chassis. Just bought the Via/Reyo, I hope the news does not de value our new MH. Fingers crossed service centers do not become sparse. Id hate to have to drive to far out of the way to get service. Not to happy with the news but I guess things happen. 

Just took my Reyo in for inspection to an authorized Dodge service center. The tech use to work for Winnebago and was quit familiar with the Sprinter chassis. He said this was the last year for manufacturing, no more. As a new owner this came as a surprise and a concern. I hope it has more to do...

I figured this was the best place to post this. If this is considered OT please remove, sorry. Getting ready to hit the road, will be gone a few months and the house will be unattended for the most part. First trip :) Im looking for a battery back up recommendation for the basement sub pump...