I have a 1982 Winnebago 621. The 12 volt system will not operate anything on it's own. When it is plugged in, everything works fine. Unplug the 110v and everything stops instantly. I checked the batteries with a voltmeter, and had 12v across both batteries. I went to the fuse box 12 v across the main fuse at the base of the box,and continuity across each of the fuses. Just to make sure the batteries were fully charging, I used the aux. batteries to start the engine. Which it did without a problem.
I guess the thing I am looking for, is the next step, or the one I missed. If someone has had a similar problem, or advice, I would appreciate it.
Thanks, Joe
I guess the thing I am looking for, is the next step, or the one I missed. If someone has had a similar problem, or advice, I would appreciate it.
Thanks, Joe