Iamjohngalt
New member
Hello all, first post here, looking to solve an issue in a recently purchased 2001 R-Vision Trail Lite 242 on the Workhorse P-32 chassis with the 8.1L gasser.
My motorhome has 5 front running lights and 5 rear running light on the coach. I used the wire for the rear running lights to power a back up camera. On a recent trip to Florida the camera and rear running lights went out, but the front lights are working normally. My coach has an ICC switch but inspection shows only a single wire coming from it. I have checked all fuses in the 2 fuse box locations and all seem to be working fine. All other lights are working normally (brake,turn,reverse).
Has anyone encountered and solved a similar issue? The timing of installing the back up camera and then loosing lights makes me think there’s some fuse location im overlooking.
Thanks in advance for any advice!
My motorhome has 5 front running lights and 5 rear running light on the coach. I used the wire for the rear running lights to power a back up camera. On a recent trip to Florida the camera and rear running lights went out, but the front lights are working normally. My coach has an ICC switch but inspection shows only a single wire coming from it. I have checked all fuses in the 2 fuse box locations and all seem to be working fine. All other lights are working normally (brake,turn,reverse).
Has anyone encountered and solved a similar issue? The timing of installing the back up camera and then loosing lights makes me think there’s some fuse location im overlooking.
Thanks in advance for any advice!