phil-t
Well-known member
I thought I knew how to test an outlet (no matter the amp rating) but this one puzzled me. A 30 AMP pedastal, I tested it with my multimeter b4 connecting - tested OK (on the voltage and polarity). Plugged in, my ATS switched, like normal, in 20-30 seconds and 120 volt things were on and off several times, then on steady for 4 hours, then OFF. Multimeter showed voltage good at pedastal and input on ATS, but the ATS would not switch on to shore power. I complained to the CG owner and we moved my cable next door to an unused pedasal. Everything has been fine for 2 days straight.
Just puzzling to me -
Any comments are welcome. Looking for better way to test park power outlets.
Just puzzling to me -
Any comments are welcome. Looking for better way to test park power outlets.