Ok, this one has me stumped...
My Atwood Hydro-Flame 7916-II will start, run, heat the trailer, but once it goes through its heat cycle and shuts down, it COMPLETELY shuts down and must be reset manually in order for it to fire up again. This is a real pain when you have to get out of bed on a cold night at 3am to restart the furnace!
The error code the board is giving me is "Air Flow/Limit Switch" (one flash). I have made sure the intake is clear and I have installed a new limit switch and it still gives me problems. Here's the stupid part....
I pulled the grill cover off yesterday, and detached the board panel from the frame and let it hang still hooked up. The furnace ran fine all day, starting, heating, shutting down, and restarting the way it's supposed too. I left it on overnight and it was still running fine today. I reinstalled the panel and grill cover today and guess what... it's back to its same shut down problem it had before!!
I'm at my wits end with this and I don't want to take it to the local dealer to have them "try" to fix something I'm sure can be solved in my driveway.
Any ideas would be appreciated.
Thanks.
My Atwood Hydro-Flame 7916-II will start, run, heat the trailer, but once it goes through its heat cycle and shuts down, it COMPLETELY shuts down and must be reset manually in order for it to fire up again. This is a real pain when you have to get out of bed on a cold night at 3am to restart the furnace!
The error code the board is giving me is "Air Flow/Limit Switch" (one flash). I have made sure the intake is clear and I have installed a new limit switch and it still gives me problems. Here's the stupid part....
I pulled the grill cover off yesterday, and detached the board panel from the frame and let it hang still hooked up. The furnace ran fine all day, starting, heating, shutting down, and restarting the way it's supposed too. I left it on overnight and it was still running fine today. I reinstalled the panel and grill cover today and guess what... it's back to its same shut down problem it had before!!
I'm at my wits end with this and I don't want to take it to the local dealer to have them "try" to fix something I'm sure can be solved in my driveway.
Any ideas would be appreciated.
Thanks.