Quillback, I know you are not the pro but you have seen and experienced the newest installation, so I have a few questions.
I don't understand why you need an RF remote. Doesn't each client accept IR inputs from a local remote?
Thanks
Bob
May not change in coach since everything is currently working quite well but if Boss gets unhappy could change.
My coach installation currently has the SK3005 with two channels dropped to HR24(with two B-Band converters) front and an HR23 in BR. If changing to the Genie system does this require CAT 6 internet cabling to be routed from the Genie Receiver (Hub) to the Clients?Quillback 424 said:- Is your wiring Cat 6 or above; if it's only Cat 5 something, will it work?
The SK3005 is powered from its own control. Is something else added to system requiring a power inserter...I saw mention of a SWM-8 which I can only assume is a multiswitch - do existing SK3005 outputs get rerouted to this SWM-8?Quillback 424 said:-
If you go with Genie, it requires a new power inserter. Don't use the one from a previous receiver.
Bummer...I haven't seen very many TVs that you can use an RF remote on, any update would have to be hardware. You can get RF to IR repeaters which are a little cumbersome but do work.Quillback 424 said:- Are your TV's compatible with D-TV's RF controllers? My Vizeo's are not so I need the Vizeo controller for volume control. I haven't checked with D-TV or Vizeo to see if there is an update available.
I don't understand why you need an RF remote. Doesn't each client accept IR inputs from a local remote?
Thanks
Bob
May not change in coach since everything is currently working quite well but if Boss gets unhappy could change.