I hope I have posted this in the right place. This has been an ongoing problem for over a year now.
This is on a 2016 winnebago destination 5th wheel.
The thermostat is a Dometic comfort control center 2 model 3314080.000
The remote sensor has always read erratic on the inside temp. It will show 55 degrees in 90 plus temps. The reason I have put up with it for so long is sometimes it reads right , but after we got in from this last trip it has read in the 55 degree range.
Now I will ask for opinions on my findings, I got a heating pad , turned it on low, put the remote sensor for the bedroom air under it, sensor them read in the 80 to 90 range, and air ran fine, remove sensor and it will drop to 55 degree range, and of course ac goes off.
In the boards opinion, is this just a bad sensor, all other functions work fine on the thermostat, and if so can a new wire with sensor be replaced, or just replace the whole thermostat?
This is on a 2016 winnebago destination 5th wheel.
The thermostat is a Dometic comfort control center 2 model 3314080.000
The remote sensor has always read erratic on the inside temp. It will show 55 degrees in 90 plus temps. The reason I have put up with it for so long is sometimes it reads right , but after we got in from this last trip it has read in the 55 degree range.
Now I will ask for opinions on my findings, I got a heating pad , turned it on low, put the remote sensor for the bedroom air under it, sensor them read in the 80 to 90 range, and air ran fine, remove sensor and it will drop to 55 degree range, and of course ac goes off.
In the boards opinion, is this just a bad sensor, all other functions work fine on the thermostat, and if so can a new wire with sensor be replaced, or just replace the whole thermostat?